Last Modified: 11-29-2007 1.6 D
Service Category: Audio/Visual/Telematics Section: Navigation/Multi Info Display
Model Year: 2008 Model: Sequoia Doc ID: RM00000102D01GX
Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: IDENTIFICATION OF NOISE SOURCE (2008 Sequoia)

IDENTIFICATION OF NOISE SOURCE

1. RADIO WAVE BAND

(a) Radio frequency band

(1) Radio broadcasts use the radio frequency bands shown in the table below.

2. SERVICE AREA

(a) The broadcast range for AM and FM is very different. Sometimes an AM broadcast can be received very clearly but FM stereo cannot.

FM stereo has the smallest service area, and is prone to picking up static and other types of interference (for example, noise).

3. RECEPTION PROBLEMS

HINT:

Besides the problem of static, there are other problems, such as "phasing", "multipath" and "fade out". These problems are caused by the nature of the radio waves themselves, not by electrical noise.

(a) AM broadcasts are susceptible to electrical interference called phasing. Occurring only at night, phasing is the interference created when a vehicle receives 2 radio wave signals from the same transmitter. One signal is reflected off of the ionosphere and the other signal is received directly from the transmitter.

(b) Multipath is a type of interference created when a vehicle receives 2 radio wave signals from the same transmitter. One signal is reflected off of buildings or mountains and the other signal is received directly from the transmitter.

(c) Fade out is caused by objects (buildings, mountains, etc.) that deflect away part of a signal, resulting in a weaker signal when the object is between the transmitter and vehicle. High frequency radio waves, such as FM broadcasts, are easily deflected by obstructions. Low frequency radio waves, such as AM broadcasts, are much more difficult to deflect.

4. NOISE PROBLEMS

(a) Technicians must have a clear understanding about the noise problems of the customer's vehicle. Use the following table to diagnose the problems.

Radio Wave

Condition in Which Noise Occurs

Presumable Cause

AM

Noise occurs in a specific area

Strong possibility of foreign noise

AM

Noise occurs when broadcasting is faint
  • Same program may be broadcasted from various local stations
  • If the program is the same, one of those may be tuned in

AM

Noise occurs only at night

Strong possibility of beats from distant broadcasting

FM

Noise occurs at a specific place during driving

Strong possibility of multipath noise and fading noise caused by changes of FM frequency

HINT:

When the noise does not match the examples above, refer to "Reception Problems". Check the descriptions about phasing and multipath.